Konumunuza ait içeriği görmek için farklı bir ülke ya da bölge seçin
Amerika Birleşik Devletleri
11:56:16 GMT+0000 (Coordinated Universal Time)
ZARF45130-L-TV
Needle roller/axial cylindrical roller bearing
Needle roller/axial cylindrical roller bearings ZARF..-L, double direction, for screw mounting, long shaft locating washer
Tercih edilen ürün
Ürün bilgisi
Main Dimensions & Performance Data
| d | 45 mm | Bore diameter |
| D | 130 mm | Outside diameter |
| H | 103 mm | Hight |
| Ca | 154.000 N | Basic dynamic load rating, axial |
| C0a | 405.000 N | Basic static load rating, axial |
| Cr | 40.000 N | Basic dynamic load rating, radial |
| C0r | 82.000 N | Basic static load rating, radial |
| Cua | 37.500 N | Fatigue load limit, axial |
| Cur | 11.500 N | Fatigue load limit, radial |
| nG Oil | 3.300 1/min | Limiting speed for oil lubrication |
| nG Grease | 1.150 1/min | Limiting speed for grease lubrication |
| MRL | 3,5 Nm | Bearing friction torque |
| ≈m | 3,898 kg | Ağırlık |
Mounting dimensions
| Da max | 91 mm | Maximum diameter of housing shoulder |
| da min | 68 mm | Minimum diameter shaft shoulder |
| t1 | 0,2 mm | Position bore in the housing |
Dimensions
| H1 | 72 mm | Height outer ring over wave washer |
| C | 22,5 mm | Width, outer ring |
| C1 | 12,5 mm | Distance to lubrication hole |
| D1 | 90 mm | Rip diameter shaft washer |
| D2 | 70 mm | Heeldiameter wave washer long |
| D3 | 88 mm | Outside diameter wave washer long |
| B | 17,5 mm | Width, wave washer |
| B1 | 38,5 mm | Width wave washer long |
| B2 | 18 mm | Width heel wave washer long |
| rmin | 0,3 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
| d1 | 6 mm | Diameter lubrication hole |
| J | 105 mm | Pitch circle diameter (holes) |
| n | 12 | Number of screwing holes |
| n x t | 30 ° | Split |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 4.000 N/µm | Rigidity axial |
| ckL | 2.100 Nm/mrad | Tilting stiffness |
| Mm | 28,1 kg*cm2 | Mass moment of inertia |
1 µm | Axial runout | |
| radial | ZMA45/85 | Recommended INA precision locknut for radial locking (not included) |
| axial | AM45 | Locknut 2 |
| MA | 150 Nm | Tightening torque nut |
33.549 N | Preload force axial | |
70X90X10 | Sealing ring | |
M8 | Screw size | |
| na | 12 | Number of screws |
| na x ta | 30 ° | Division (screwing holes) |
İndirmeler:
Mevcut ürün modeliniz
| Cage | TV | Plastic Cage made from PA66 |
| Locating Feature , bearing outer ring | L | Stepped shaft locating washer extended on one side |
Özellikleri
