Konumunuza ait içeriği görmek için farklı bir ülke ya da bölge seçin
Amerika Birleşik Devletleri
00:19:01 GMT+0000 (Coordinated Universal Time)
MLF32-300-ZR
Linear actuator
Actuators with external track roller guidance system and toothed belt drive.Basic carriage, one driven carriage
Ürün bilgisi
Metrik
İngiliz ölçü sistemi
Основные размеры и рабочие характеристики
| B1 | 86 mm | Total Width |
| H | 82 mm | Высота |
| L | 300 mm | Длина |
| ≈m | 9,9 kg/m | Ağırlık |
Присоединительные размеры
| D86 | 70 mm | |
| D87 | 80 mm | Ø Bolt circle |
| d85 | 20 mm | |
| d86 | 61 mm | Ø Inner Fit |
| L88 | 25 mm | |
| G43 | M8 | Thread |
| G87 | M6 | Thread |
| h85 | 41,5 mm | |
| JB43 | 59 mm | |
| JL43 | 100 mm | Tolerance ±0,2 |
| JL44 | 245 mm | |
| jB8 | 43 mm | |
| NB85 | 6 mm | Width of Keyway |
| NL85 | 16 mm | Length of Keyway |
| NT85 | 3,5 mm | Depth of Keyway |
| T86 | 2,3 mm | Depth Fit |
| Tol T86 up | 0,3 mm | Upper tolerance |
| Tol T86 low | 0 mm | Lower tolerance |
| t43 max | 14 mm | Depth of Thread |
| t87 max | 12 mm |
Габаритные размеры
| B2 | 75 mm | Width of Support Rail |
| B4 | 74 mm | Width of Return Unit |
| B72 | 2 mm | |
| H1 | 32 mm | |
| H2 | 66,5 mm | Высота |
| H4 | 81,5 mm | Height of Return Unit |
| H7 | 47 mm | |
| h13 | 25 mm | |
| L2 max | 8.000 mm | Maximum length of Support Rail |
| L4 | 80 mm | |
| L6 | 6 mm | Length of Wiper Brushes |
| S | 85 mm | Конструктивный размер |
Технические характеристики
| mLAW | 1,38 kg | Mass of Carriage |
| vmax | 8 m/s | Maximum Speed |
| amax | 40 m/s2 | Maximum Acceleration |
| Rx | 205 mm | |
| Ry | 20,5 mm | |
| Rz | 54 mm | |
| I C | 4.100 N | Load direction I: compressive load |
| I C0 | 2.400 N | Load direction I: compressive load |
| II C | 4.100 N | Load direction II: tensile load |
| II C0 | 2.400 N | Load direction II: tensile load |
| III C | 6.600 N | Load direction III: lateral load |
| III C0 | 4.200 N | Load direction III: lateral load |
| M0x per | 30 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 425 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 205 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 104 cm4 | Geometrical moments of inertia of Support Rail 2 |
| Iz | 76 cm4 | Geometrical moments of inertia of Support Rail 2 |
Дополнительная информация
18 Nm | Max. permissible drive torque | |
4 x LFR50/8-6-2Z | Track Rollers | |
0,1 mm | Repeat Accurancy ± | |
175 mm | Feed (mm/rotation) | |
20AT5 | Toothed Belt | |
0,068 kg/m | Mass of Toothed Belt | |
640 N | Permissible Toothed Belt operating force | |
2,2 kg*cm2 | Mass moment of inertia of Gears |
Диапазон температур
| Tmin | 0 °C | Minimum operating Temperatur |
| Tmax | 80 °C | Maximum operating Temperatur |
Dipnotlar
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
2
Moment of inertia of area of “closed” support rail (= support rail without free milled area on base). In comparison with these values, the moment of inertia of area Iy of the side with the free milled area on the base is reduced to an insignificant degree and the moment of inertia of area Iz is reduced by approx. 10%.
İndirmeler:
Mevcut ürün modeliniz
| Size code | 32 | |
| Length of carriage | 300 | 300 mm |
| Carriage design | Standard | Standard carriage |
| Drive type | (3)ZR | Toothed belt drive |
| Additional carriage | / | No additional carriage |
| Support rail design | / | One-piece |
| Bellow | / | No |