Konumunuza ait içeriği görmek için farklı bir ülke ya da bölge seçin
Amerika Birleşik Devletleri
01:14:19 GMT+0000 (Coordinated Universal Time)
GIKL6-PB
Rod end
Rod end with internal thread, left hand thread, requiring maintenance, DIN ISO 12240-4. dimension series K, type F, open design
Tercih edilen ürün
Ürün bilgisi
Main Dimensions & Performance Data
| d | 6 mm | Bore diameter bearing |
| D | 16 mm | Outside diameter bearing |
| B | 9 mm | Width inner ring |
| Cr | 4.320 N | Basic dynamic load rating, radial |
| C0r | 7.990 N | Basic static load rating, radial |
| Gr | 0 - 0,035 | Radial Clearance |
| ≈m | 28,165 g | Ağırlık |
Dimensions
| dK | 12,7 mm | Ball diameter |
| d1 | 8,9 mm | Outer flange diameter inner ring |
| d2 | 20 mm | Outer eye diameter |
| d3 | M6 | Thread size |
| d4 | 10 mm | Shank diameter |
| h1 | 30 mm | Shank Length Internal thread head |
| C1 | 6,75 mm | Width of the rod end |
| α | 13 ° | Tilt angle |
| l3 | 12 mm | Thread length Internal thread |
| l4 | 40 mm | Total length internal thread head |
| l5 | 5 mm | Length rod end shank |
| l7 | 11 mm | Distance drilling with/shaft start |
| d5 | 13 mm | Shank diameter, large |
| r1smin | 0,3 mm | Edge Spacing |
| W | 11 mm | Width Across Flat |
| dOT | 0,012 mm | Bore diameter bearing, upper tolerance |
| dUT | 0 mm | Bore diameter bearing, lower tolerance |
| dT | H7 | Bore diameter bearing, tolerance |
| BOT | 0 mm | Width inner ring, upper tolerance |
| BUT | -0,12 mm | Width inner ring, lower tolerance |
| Grmax | 0,035 mm | Radial clearance, maximum |
| Grmin | 0 mm | Radial clearance, minimum |
Temperature range
| Tmin | -60 °C | Operating temperature min. |
| Tmax | 250 °C | Operating temperature max. |
İndirmeler:
Mevcut ürün modeliniz
| Clampable | Not clampable | |
| Maintenance | Maintenance required | |
| Mounting | Internal thread | |
| Lubrication nipple | DIN71412-AS6 (tapered grease nipple) | |
| Slotted | No | |
| Thread Pitch | Left-hand thread | |
| Sealing | Without |
Özellikleri
