Выбрать другую страну или регион, чтобы увидеть контент для Вашего местоположения.
Соединенные Штаты Америки
20:15:24 GMT+0000 (Coordinated Universal Time)
Информация о продукции
Метрическая система мер
Дюймовая система мер
Основные размеры и рабочие характеристики
| B1 | 130 mm | Total Width |
| H | 119 mm | Высота |
| L | 200 mm | Длина |
Присоединительные размеры
| D86 | 95 mm | |
| D87 | 115 mm | Ø Bolt circle |
| d85 | 20 mm | |
| d86 | 76 mm | Ø Inner Fit |
| L88 | 31 mm | |
| G43 | M10 | Thread |
| G87 | M8 | Thread |
| h85 | 60,6 mm | |
| JB43 | 90 mm | |
| JL43 | 110 mm | Tolerance ±0,2 |
| jB8 | 80 mm | |
| NB85 | 6 mm | Width of Keyway |
| NL85 | 25 mm | Length of Keyway |
| NT85 | 3,5 mm | Depth of Keyway |
| T86 | 4 mm | Depth Fit |
| Tol T86 up | 0,5 mm | Upper tolerance |
| Tol T86 low | 0 mm | Lower tolerance |
| t43 max | 20 mm | Depth of Thread |
| t87 max | 15 mm |
Габаритные размеры
| B2 | 112 mm | Width of Support Rail |
| B4 | 111 mm | Width of Return Unit |
| B72 | 2 mm | |
| H1 | 46,1 mm | |
| H2 | 98,6 mm | Высота |
| H4 | 118,3 mm | Height of Return Unit |
| H7 | 65,4 mm | |
| h13 | 25 mm | |
| h14 | 50 mm | |
| L2 max | 8.000 mm | Maximum length of Support Rail |
| L4 | 115,5 mm | |
| L6 | 6 mm | Length of Wiper Brushes |
| S | 85 mm | Конструктивный размер |
Технические характеристики
| mLAW | 4,82 kg | Mass of Carriage |
| vmax | 8 m/s | Maximum Speed |
| amax | 40 m/s2 | Maximum Acceleration |
| Rx | 60 mm | |
| Ry | 29,3 mm | |
| Rz | 83 mm | |
| I C | 10.000 N | Load direction I: compressive load |
| I C0 | 5.200 N | Load direction I: compressive load |
| II C | 10.000 N | Load direction II: tensile load |
| II C0 | 5.200 N | Load direction II: tensile load |
| III C | 16.800 N | Load direction III: lateral load |
| III C0 | 10.000 N | Load direction III: lateral load |
| M0x per | 110 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 290 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 150 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 386 cm4 | Geometrical moments of inertia of Support Rail 2 |
| Iz | 301 cm4 | Geometrical moments of inertia of Support Rail 2 |
Дополнительная информация
73,5 Nm | Max. permissible drive torque | |
4 x LFR5201-10-2Z | Track Rollers | |
0,1 mm | Repeat Accurancy ± | |
270 mm | Feed (mm/rotation) | |
32AT10 | Toothed Belt | |
0,2 kg/m | Mass of Toothed Belt | |
1.750 N | Permissible Toothed Belt operating force | |
12,6 kg*cm2 | Mass moment of inertia of Gears |
Диапазон температур
| Tmin | 0 °C | Minimum operating Temperatur |
| Tmax | 80 °C | Maximum operating Temperatur |
Сноски
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
2
Moment of inertia of area of “closed” support rail (= support rail without free milled area on base). In comparison with these values, the moment of inertia of area Iy of the side with the free milled area on the base is reduced to an insignificant degree and the moment of inertia of area Iz is reduced by approx. 10%.
Загрузки:
Ваш текущий вариант продукта
| Size code | 52 | |
| Length of carriage | 200 | 200 mm |
| Carriage design | / | Стандартная каретка |
| Drive type | (3)ZR | Toothed belt drive |
| Additional carriage | / | No additional carriage |
| Support rail design | / | One-piece |
| Bellow | / | No |